Labindia – Vinca Labtech https://www.vincalabtech.com Tue, 30 Jun 2026 12:10:44 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.1 https://www.vincalabtech.com/wp-content/uploads/2026/03/cropped-vinca-logo-set-0155-50x50.jpg Labindia – Vinca Labtech https://www.vincalabtech.com 32 32 Tablet Dissolution Tester DS 8000 (Basic) SMART https://www.vincalabtech.com/product/tablet-dissolution-tester-ds-8000-basic-smart/ https://www.vincalabtech.com/product/tablet-dissolution-tester-ds-8000-basic-smart/#respond Thu, 09 Apr 2026 11:23:19 +0000 https://www.vincalabtech.com/?post_type=product&p=3257 Technical Specifications –

Parameter Value
Control Micro Controller
Method Storage Minimum 1000 methods with parameters
Software Compliance 21 CFR Part 11
Temperature Range 20°C to 55°C
Temperature Accuracy up to 45°C ±0.1°C & >45°C up to 55°C ±0.2°C
Temperature Resolution 0.1°C
Temperature Sensor DTS – Digital Temperature Sensor
Evaporation Loss 1% (at 50 RPM / 37°C / 1000mL / 24hrs)
Display 7’’ high resolution display with capacitive touch screen
Paddle/Basket Shaft Stirring Speed 20 to 350 RPM (20 to 250±1, 251 to 350±2)
Sampling Time Selectivity Fixed / programmable (Varying Intervals)
Time Interval Selectivity In steps of 1 Minute
Vessel Capacity 1000 mL
Water Bath 17 litres capacity with built-in water level sensor / front located drain tap for easy draining of the water bath
Maximum Number Of Intervals 50
Dissolution Process Time 1 min to 1200 hrs
Print Interface USB / WiFi Direct enabled Printer
Data Backup Interface USB / LAN Port
Electrical Power 110/220V AC – 50 Hz/60 Hz
Dimension (WDH) 71.56070.5 cm
Weight 80 kg Approx
Dissolution Vessel Option Polycarbonate / Glass Vessel (Clear & Amber)
]]> https://www.vincalabtech.com/product/tablet-dissolution-tester-ds-8000-basic-smart/feed/ 0 Atomic Absorption Spectrophotometer AA8000 https://www.vincalabtech.com/product/atomic-absorption-spectrophotometer-aa8000/ https://www.vincalabtech.com/product/atomic-absorption-spectrophotometer-aa8000/#respond Tue, 07 Apr 2026 12:11:11 +0000 https://www.vincalabtech.com/?post_type=product&p=3151 Technical Specifications –

Flame System –

Instrument can be configured with Flame, Graphite or Integrated Flame & Graphite (interchanged using Software)

Parameter Value
Wavelength Range 185nm – 915nm
Optics Double Beam, Sealed & Vibration free optical System with a reflective optical compartment
Detector PMT (Wide Range)
Monochromator Czerny-turner type with Holographic Grating of 1800 lines/mm and Reciprocal Linear Dispersion better than 1.6 nm/mm, focal length 300mm.
Spectral Bandwidth Adjustable slit from 0.1 nm. to 2 nm. (software selectable)
Wavelength Accuracy ± 0.15nm
Wavelength Reproducibility < 0.05nm
Resolution 0.2nm ± 0.02nm
Baseline Stability 0.005A/30min
Sensitivity (Cu) >0.9 Absorbance or better for 5 ppm Cu solution-12
Detection Limit Cu < 0.004 μg/ml (flame) Cd < 0.4 x 10 g (graphite furnace)
Repeatability Cu < 0.7% ( Air/Acetylene flame) Ba < 1.0% ( Nitrous oxide/Acetylene flame) Cu < 2.0% Cd < 2.0% (Graphite Furnace)
Background Correction Deuterium Arc / Self reversal upto 2.5 Absorbance
Characteristic Concentration Cu < 0.02 μg/ml, Ba < 0.15 mg/ml (NO/Acetylene)
Burner Heads 2
Nebuliser High Efficiency Nebuliser
Burner Head Titanium Alloy
Atomization Chamber Corrosion-resistant material
Position Adjustment Automatic changeover (AA8000GF) Manual (AA8000F) Automatic Setting of Optimum Height for Flame Burner. Burner movement in horizontal & vertical direction by software.
Safety Functions (Interlocks) Burner Identification, Flame Sensor, Gas leak Sensor, Low Gas Pressure Sensor, Drain Trap Sensor, Power Loss Protection, Circulation Water (graphite), Over Temperature Sensor (graphite)

Graphite System

  • Graphite Tubes are pyrolytically coated & transversely heated upto 3000˚C
  • Platform tubes supplied as standard, capable of accepting volumes upto 20 µL
  • Programmable graphite furnace upto 10 stages which can be set & stored using Software
  • Replacement of Graphite tube performed by a simple command using Software
  • Graphite tube cooling by additional water circulatory system
  • Cd Sensitivity: 4×10 gm

Safety Features –

  1. Argon Gas pressure sensor
  2. Water Flow sensor
  3. Over Temperature sensor
  4. Broken Graphite Tube protection
]]> https://www.vincalabtech.com/product/atomic-absorption-spectrophotometer-aa8000/feed/ 0 UV3092 Spectrophotometer https://www.vincalabtech.com/product/labindia-uv3092-spectrophotometer-with-pmt-detector/ https://www.vincalabtech.com/product/labindia-uv3092-spectrophotometer-with-pmt-detector/#respond Tue, 07 Apr 2026 12:03:34 +0000 https://www.vincalabtech.com/?post_type=product&p=3149 Technical Specification –

Parameter Value
Features and Specifications Microprocessor based UV/VIS Spectrophotometer display operation on 220V/50Hz.
Control Complete control through PC with UV-win Software.
Optics High end Double Beam optics with holographic grating in Czerny-Turner mounting.
Wavelength range 190 – 900nm
Spectral Bandwidth Continuous changeable slit from 0.1 – 5 nm
Detector PMT
Stray light ≤0.01% T (220nm Nal, 340nm NaNo2)
Wavelength Accuracy ± 0.3nm (automatic wavelength correction)
Wavelength Repeatability < 0.1nm
Photometric range -4A ~ 4A
Photometric Accuracy ±0.002Abs (0-0.5Abs); ±0.004Abs (0.5-1.0Abs); ±0.3% T (0-100%T)
Photometric Repeatability ±0.001 Abs (0-0.5 Abs); ± 0.002Abs (0.5–1.0Abs)
Noise ±0.0004Abs
Drift ≤0.0004A/1h
Baseline Flatness 0.001A
Communication Interface USB
Lamps High intensity Tungsten Halogen and Deuterium lamp with automatic changeover.
Validation & Security Built in validation program diagnostic and security functions.
Operational modes Photometric, quantitative, Spectrum scan, Kinetics, DNA and Protein. UV-Win software adds functions such as 3D Spectrum analysis, GLP/GMP protocol.
Sample Compartment Large sample compartment with built in 1 Reference and 1 Sample holder compatible with wide range of accessories.
UV WIN Software Version 5.0 Windows based and supports Windows XP operating system. Offers single point control, measurement, analysis of UV-VIS Spectrophotometer from PC.
Standard Features Client Management
Standard Features Quality Control
Standard Features 3D Spectra Graph
Standard Features Multi-users management
Standard Features Operation log and Audit Trail for security guarantee as well as compliant to GLP and Pharmacopoeial requirement.
Standard Features Data File Incorporation and Instrument Validation – includes 6 items: “Wavelength accuracy”, “Photometric accuracy”, “Stray light”, “Noise”, “Baseline flatness”, and “Stability”.
Design Compact design with small footprint
]]> https://www.vincalabtech.com/product/labindia-uv3092-spectrophotometer-with-pmt-detector/feed/ 0 UV 3200TS Spectrophotometer (Touchscreen) https://www.vincalabtech.com/product/labindia-uv-3200ts-spectrophotometer-touchscreen/ https://www.vincalabtech.com/product/labindia-uv-3200ts-spectrophotometer-touchscreen/#respond Tue, 07 Apr 2026 12:03:22 +0000 https://www.vincalabtech.com/?post_type=product&p=3143 Technical Specification –

Parameter Value
Optical system Double beam with Czerny-Turner Monochromator
Light source Tungsten and Deuterium Lamp, pre-aligned
Spectral bandwidth 0.5, 1, 2, 4nm
Wavelength range 190 ~ 1100 nm
Wavelength accuracy ±0.3 nm ( full range 190nm – 1100nm)
Wavelength repeatability 0.1 nm
Wavelength resolution 0.1 nm
Scanning speed 1 to 3000nm/min variable
Photometric range -4 to 4.0A
Photometric accuracy 0.5A ± 0.002 A
Noise 0.000016 Abs RMS@500nm
Drift < 0.0002 Abs/H @ 500 nm
Baseline flatness ±0.001 A
Stray light 0.02 @ 220nm KCL 198nm = 1% T
Optional Accessory Specular Reflection Accessory, Integrating Sphere 60mm / 100mm
Optional Accessory Automatic 8 Cell Changer, long path cell holder, Peltier Solid Sample holder etc.
Photometric mode Photometry, Quantitation, Spectrum, Kinetics
Detector Dual Silicon photodiode
Lamp Interchange Wavelength Automatic interchange linked to wavelength. The interchange wavelength can be set freely
Wavelength Slew Rate 6500 nm/min
Sample cell holder Pair of 10 mm cell holder upgradable to automatic 8 cell changer
Display 10.1 Inch IPS colour LCD touch screen, capacitive 10-point touch control (resolution: 1280×800), 2GB memory/64GB SSD storage, 178 degree full view, 16 million colours, high resolutions, 10.1 inch IPS colour. Embedded Operating system, with sealed membrane.
Software Complies with the requirement of 21CFR Part 11 with GLP/GMP functions, file management functions.
Storage 64GB (built-in), unlimited expansion (USB storage, SD card, network storage device)
Interface USB-A (extensible; connect USB printers, storages, mice, keyboards and other peripherals)×3, USB-B (PC)×1, RJ 45 (Ethernet)×1, VGA×1, HDMI×1, Bluetooth, WiFi
Power 100 ~ 240 V AC, 50/60 Hz, 100 W
Dimension 600450200 mm
Weight 18 kg
]]> https://www.vincalabtech.com/product/labindia-uv-3200ts-spectrophotometer-touchscreen/feed/ 0 VIBRATORY SIEVE SHAKER VS1100 (TOUCHSCREEN) https://www.vincalabtech.com/product/vibratory-sieve-shaker-vs1100-touchscreen/ https://www.vincalabtech.com/product/vibratory-sieve-shaker-vs1100-touchscreen/#respond Tue, 07 Apr 2026 11:34:07 +0000 https://www.vincalabtech.com/?post_type=product&p=3142 Technical Data –

Parameter Value
Model No. VS 1100 Touch Screen
Application Separation, Fractioning, Particle Size Determination
Feed material Powder, Bulk Material, Suspensions
Measuring range 20µm ~ 25mm
Amplitude adjustment range 0.2 – 3.0mm
Sieving Time setting 1 min ~ 99 min
Interval operation adjustment range 1 sec ~ 99 sec
Mode Of Operation Continuous & Intermittent
Pause / Holding time Programmable 1 sec – 9 sec pause time after set interval of 1 sec – 99 sec during sieving process
Drive / sieving mode Electromagnetic Drive With unique 3D Motion
Sieve diameters 100/150/200/203 mm(8″)
Sieves Mesh Sizes µm (ASTM Mesh Size) 20µm (635 Mesh) to 25mm (1″ Mesh)
Parameter combinations that can be stored 9
Max. number of fractions 9 / 17
Max. feed capacity 3 Kg
Rated power 400W
Noise Level <60 db
Power supply 220V,50Hz/60Hz
Instrument size (WDH) 400*480*240mm
Package size (WDH) 400*615*615mm
Weight 43 kg
]]> https://www.vincalabtech.com/product/vibratory-sieve-shaker-vs1100-touchscreen/feed/ 0 Labsox Ease Fat Analyzer https://www.vincalabtech.com/product/labsox-ease-fat-analyzer/ https://www.vincalabtech.com/product/labsox-ease-fat-analyzer/#respond Tue, 07 Apr 2026 11:05:15 +0000 https://www.vincalabtech.com/?post_type=product&p=3123 Technical Data –

Parameter Value
Model LSE M06 Fat Analyzer
Application FOOD FEED NATURAL PRODUCTS PHARMA POLYMER
Features TRIPLE ALARMS I.E. SOUND, LIGHT, LCD SCREEN WORD PROMPTS ARE AVAILABLE
Features EXCLUSIVE AIR INSULATION TECHNIQUE LEAVES THE CASE IN ROOM TEMPERATURE, HAS THERMAL INSULATION AND TEMPERATURE MAINTENANCE TWO FUNCTIONS
Features 4.3” LCD SCREEN AND MICROCOMPUTER CONTROL SYSTEM ARE ADOPTED
Temperature range Room temperature+5℃ – 280℃
Heating time Upto 280℃ in 10 Minutes
Measuring range 0 – 100%
Temperature accuracy ±1℃
IP Rating IP 65
Sample weight 0.5 – 15g (generally 2 – 5g, depending on sample)
Capacity per batch 6pcs/batch
Solvent cup volume 100mL
Solvent recovery ≥80%
Shortened extraction time 20 – 80%
Power supply 220VAC±10%, 50/60Hz
Power 1KW
Dimensions 650mm×320mm×715mm
Net Weight 35Kg
]]> https://www.vincalabtech.com/product/labsox-ease-fat-analyzer/feed/ 0 LabFiber Pro Fiber Analyzer https://www.vincalabtech.com/product/labfiber-pro-fiber-analyzer/ https://www.vincalabtech.com/product/labfiber-pro-fiber-analyzer/#respond Tue, 07 Apr 2026 11:04:05 +0000 https://www.vincalabtech.com/?post_type=product&p=3118 Technical Specification –

Parameter Value
Measurement range 0.1% – 100%
Sample weight 0.5g – 3g
Repeatability error Crude Fiber Content below 10%, ≤0.4% ; Crude Fiber Content above 10%, ≤1%
Capacity 6 pcs/batch
Pre-heating time 10-12min
Heating to boiling ≈5-10min
Display 7 inches touch color screen
Rated power 2.2KW
Power supply 220 VAC ±10% 50/60Hz
Dimension 776mm×476mm×644mm
IP Rating IP 65
]]> https://www.vincalabtech.com/product/labfiber-pro-fiber-analyzer/feed/ 0 Scrub Pro Exhaust System https://www.vincalabtech.com/product/scrub-pro-exhaust-system/ https://www.vincalabtech.com/product/scrub-pro-exhaust-system/#respond Tue, 07 Apr 2026 10:58:48 +0000 https://www.vincalabtech.com/?post_type=product&p=3116 https://www.vincalabtech.com/product/scrub-pro-exhaust-system/feed/ 0 Labkjel Fusion Pro Kjeldahl Digestor https://www.vincalabtech.com/product/labkjel-fusion-pro-kjeldahl-digestor/ https://www.vincalabtech.com/product/labkjel-fusion-pro-kjeldahl-digestor/#respond Tue, 07 Apr 2026 10:54:49 +0000 https://www.vincalabtech.com/?post_type=product&p=3112 Technical Specification –

LKF 400 Kjeldahl Digestor System

Parameter Value
Temperature range Room temperature +5 – 450℃
Temperature accuracy ±1℃
Heating method Infrared heating and high-purity graphite conduction
Heating insulation method unique air duct insulation technology
Digestion tube capacity 300mL
Capacity per batch 20pcs/batch
Program 500
Time Selection 1 – 1440 Minutes
Power supply 220 VAC±10% 50/60Hz
Dimensions 515mmX458mmX730mm
Net weight 40Kg
IP Rating IP 65
]]> https://www.vincalabtech.com/product/labkjel-fusion-pro-kjeldahl-digestor/feed/ 0 Labkjel Max Automatic Kjeldahl Nitrogen & Protein Analyzer https://www.vincalabtech.com/product/labkjel-max-automatic-kjeldahl-nitrogen-protein-analyzer/ https://www.vincalabtech.com/product/labkjel-max-automatic-kjeldahl-nitrogen-protein-analyzer/#respond Wed, 01 Apr 2026 14:04:23 +0000 https://www.vincalabtech.com/?post_type=product&p=3071 Technical Specification –

LKm 1403 Automatic Kjeldahl Nitrogen / Protein Analyzer

Parameter Value
Measuring range 0.01mg – 240mg N
Analysis Time 3.5 – 5min/sample
RSD ≤0.5%
Recovery ≧99.5%
Burette Precision 1.0μL/step
Sample Capacity solid ≦5g/sample, liquid ≦20mL/sample
Water Consumption in distillation Process 1.5L/min
Data Storage Capacity 1800 groups
Display 5.6″ colour touch screen
Power supply 220VAC±10%, 50/60Hz
Power 2Kw
Net weight 38Kg
Dimensions 455mm×391mm×730mm
]]> https://www.vincalabtech.com/product/labkjel-max-automatic-kjeldahl-nitrogen-protein-analyzer/feed/ 0