Tablet Testing Instruments – Vinca Labtech

LABINDIA Leak Tester LT-600

VincaLabtech — Wed, 18 Mar 2026 13:09:00 +0000

Technical Specifications –

Parameter	Value
Control	Micro Controller based
Vacuum Range	150 – 600 mmHg
Vacuum Setting	Better Vacuum Stabilization Set Level
Pressure Unit	mmHg / Psi / kPa/ user defined
Accuracy	Better than ± 10mmHg
Desiccator	8 inches, 10 inches, 12 inches
Display	7’’ capacitive Touch Screen color Display
Self-Test	Facility to Scan(Valves, Pump and Sensor)
Real Time Clock	Yes
Hold Time	Upto 99 minutes 59 seconds
Report Storage	Built-in SD Card
Printer connectivity	Centronics parallel port for Dot matrix / Desk jet / Serial Printer
Serial Interface	a) RS232-1 for balance Connectivity (Sartorius/Mettler) b) RS232-2 for PC connectivity for data download
Number of samples	25
Print Report	Standard and User Defined / Method
Calibration	Auto Calibration with altitude correction
Accessories	Polycarbonate Desiccator along with connecting tube, Instruction Manual
Date Format	DD/MM/YYYY
No. of Methods	100 test method
User management	Admin + 50 Users with multiple rights selection
Dimensions	275(W) x 400(D) x 210(H) mm
Weight	12 Kg
Electrical Power	230V ± 10%, 50 Hzor 115V ± 10%, 60 Hz 150W
Environmental Operating Conditions	a) Operation Indoor b) Temperature ambient to 45° C c)Humidity 20% to 80%

LABINDIA Tablet Hardness Tester | Single Station TH-1050M

VincaLabtech — Wed, 18 Mar 2026 12:47:36 +0000

Features:

Advance Micro-controller based user-friendly state-of-the-art product design with alphanumeric
splash waterproof polyester soft keys for keyboard. User interactive software in dialogue mode for ease of operation with protection against invalid entries.
Single Station Automatic measurement of tablet parameters – Thickness, Width, Diameter/Length, Hardness and Weight
Non-Volatile memory storage of 99 methods with parameters with Alphanumeric entries of Sample Name and Identification Number for authentication.
Automatic run can be performed continuously up to 1-99 tablets. RUN can be re-started on power failure or on System Reset with last run parameters
Linear Displacement 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6 mm/sec with fast advance & return movement of breaking arm saves runtime.
Daily Auto Incremented Run Number and Factory entered CUSTOMER NAME with Instrument Serial Number on report makes system foolproof and GLP compliant.
Two Tier – a) ADMIN, and b) USER password protection for method editing and Validation. 25 Users can be set with Name and password.
Built-in Real Time Clock (RTC) for date and time display and on printout.
Process Stage and Compression Press no. entry, NMT, NLT and Percentage Limit for detected values of Width, Thickness, Diameter/Length & Hardness with Star mark for out of limit values.
Validation/Calibration protocol with verification for Hardness – 3-point Load Cell calibration with Standard weights & Diameter/Length/Thickness/Width Calibration with Standard gauges.
Quick RUN for Independent Thickness, Diameter/Length, Hardness or All parameter measurement in sequence up to 25 sample tablets with GLP information.
Error indication on display with Audible alarm helps user to trace the problem.
Printer Compatibility for Deskjet, Inkjet & Dot-matrix printer.
PC Based Data downloading facility using EDC 21 software over LAN (optional)

LABINDIA Tablet Friability Tester FT-2020

VincaLabtech — Wed, 18 Mar 2026 12:29:02 +0000

Key Features:

7” Colour High resolution display with touch screen interface & user interactive software.
Designed to meet specifications of USP, IP and other Pharmacopoeias.
Practically unlimited test reports with Date and time stamp.
Offers a count and time mode.
Automatic discharge of the sample into individual sample tray after completion of each run.
10° tilting of drums as per USP recommendation for odd shaped tablets.
Easy front-loading system.
Supports friability drum and abrasion drum.
Calculation of friability – percentage weight-loss.
Balance interface for sample auto weight transfer.
Auto-start facility to continue the run in the case of power failure.
Multilevel user management with editable privileges.
Data downloading facility with PC based EDC 21 software.

Specifications:

7’’ capacitive touch screen color display
20-70 RPM
Actual setting ± 1 rotation
2 Drums, Roche type or Abrasion type (optional)
Acrylic as per USP
1 admin ,50 users with multiple right selection
100 test method non-volatile memory storage
Built-In SD card
Centronics parallel port for Dot matrix / Desk jet /Serial Printer
RS232C-1 Balance connectivity (Sartorius /Mettler)
RS232C-2PC Connectivity for data download
110/230 VAC /,50Hz/60Hz, 35W
Operation Indoor
Temperature Ambient to 45°C
Humidity 20% to 80%
Altitude: up to 2000m.
310 X 320 X 490 mm. (W X D X H)
12 Kg
Count or Time, user selectable
1Programmable Count 0 to 9999
Or Programmable Time up to 99:59 (HH:MM)

Display Format 99:59:5