Uncategorized – Vinca Labtech https://www.vincalabtech.com Wed, 20 May 2026 10:00:10 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.1 https://www.vincalabtech.com/wp-content/uploads/2026/03/cropped-vinca-logo-set-0155-50x50.jpg Uncategorized – Vinca Labtech https://www.vincalabtech.com 32 32 COD Set-Up MD 610 https://www.vincalabtech.com/product/cod-set-up-md-610/ https://www.vincalabtech.com/product/cod-set-up-md-610/#respond Fri, 10 Apr 2026 12:20:42 +0000 https://www.vincalabtech.com/?post_type=product&p=3308 ® COD Setups allow highly sensitive and precise water testing with minimum effort. They measure the ST-COD concentration by photometric detection employing a linear relationship between absorbance and concentration. After adding the sample to a Lovibond® COD tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor for two hours at 150 °C and then analysed in the photometer. The COD Setups comprise the photometer, 25 tube tests for each of the two lower measuring ranges, a reactor for sample digestion and a vial stand.]]>
  • ST-COD sealed tubes ready for use
  • Suppression of chloride interference up to 1000 mg/L (LR & MR) up to 10000 mg/L (HR)
  • Mercury free tube tests,in absence of chloride interference
  • 4 ranges:
    • Low range: 3 – 150 mg/L, meets ISO 15705:2002
    • Middle-low range: 15 – 300 mg/L, meets ISO 15705:2002
    • Middle range: 20 – 1500 mg/L, meets ISO 15705:2002
    • High range: 200 – 15000 mg/L

    •  

    Technical Data

    Parameter Value
    Auto – OFF   Yes
    Portability   Benchtop
    Compliance   CE

     

    Measuring Range

    Test Name Measuring Range Chemical Method
    COD HR TT    200 – 15000 mg/L COD Dichromate / H₂SO₄
    COD LMR TT    15 – 300 mg/L COD Dichromate / H₂SO₄
    COD LR TT    3 – 150 mg/L COD Dichromate / H₂SO₄
    COD MR TT    20 – 1500 mg/L COD Dichromate / H₂SO₄
    ]]>     https://www.vincalabtech.com/product/cod-set-up-md-610/feed/ 0     Thermoreactor RD 125 https://www.vincalabtech.com/product/thermoreactor-rd-125/ https://www.vincalabtech.com/product/thermoreactor-rd-125/#respond Fri, 10 Apr 2026 11:30:09 +0000 https://www.vincalabtech.com/?post_type=product&p=3298 Three Temperature Ranges
    The reactor can operate optionally with 100°C, 120°C or 150°C – depending in each case on the sample to be prepared.

    Three Different Reaction Times
    Three different reaction times are available with 30, 60 and 120 minutes. Your advantage: Afterwards the unit switched itself off automatically.

    Large Cuvette Shaft
    Place up to 24 16-mm-round cuvettes in the RD 125.

    Voltage Change Possible
    The RD 125 can be used with various voltages: Choose 110 V and
    220 V with the voltage selector on the back.

     

    Technical Data

    Parameter Value
    Auto-OFF Yes
    Power Supply 230V / 50–60Hz or 115V / 50–60Hz
    Beeper Max. 88 dB (Piezo buzzer)
    Suggestion Temperature 100°C / 120°C / 150°C
    Heating-up Rate 20°C → 150°C in 12 minutes
    Selected Time 30 / 60 / 120 minutes and continuous operation
    Environmental Conditions 10–40°C, max. 85% relative humidity
    Compliance CE
    Dimensions 219 × 171 × 248 mm
    Weight 3.9 kg
    ]]>     https://www.vincalabtech.com/product/thermoreactor-rd-125/feed/ 0     TB 211 IR Portable Turbidimeter https://www.vincalabtech.com/product/turbidimeter-tb-350-copy/ https://www.vincalabtech.com/product/turbidimeter-tb-350-copy/#respond Fri, 10 Apr 2026 11:23:15 +0000 https://www.vincalabtech.com/?post_type=product&p=3296
  • Range 0.01 - 1100 NTU
  • Measurement with infrared light at an angle of 90 °
  • Measurement of colored liquids
  • Easy handling
    •  ]]>     Technical Data
    Parameter Value
    Optics temperaturecompensated LED ( λ = 860 nm) and photosensor amplifier in water proof sample chamber, infrared light
    Measuring Principle nephelometric (90° scattered light)
    Measuring Range 0,01-1100 NTU (Autorange)
    Accuracy ± 2.5 % of reading, or ± 0.01 NTU, whichever is bigger, in the range of 0.01 – 500 NTU ; ± 5 % of reading in the range of 500 – 1000 NTU
    Display backlit LCD
    Interfaces Micro-USB
    Operation polycarbonate membrane, splash proof
    Internal Storage internal ring memory for 125 data sets
    Clock Real Time Clock and Date
    Portability Portable
    Compliance CE
    Dimensions 4.33 x 2.17 x 7.48″
    Weight with Packaging (Basic Unit)

     

    ]]>     https://www.vincalabtech.com/product/turbidimeter-tb-350-copy/feed/ 0     TB350 IR Portable Turbidimeter https://www.vincalabtech.com/product/turbidimeter-tb-350/ https://www.vincalabtech.com/product/turbidimeter-tb-350/#respond Fri, 10 Apr 2026 11:22:25 +0000 https://www.vincalabtech.com/?post_type=product&p=3293 turbidimeter is an analytical instrument used to measure the turbidity or cloudiness of a liquid caused by suspended particles.
    It works by detecting how much light is scattered by particles in the sample, helping assess water quality and clarity.]]>
  • Reads up to 4000 NTU without the need for dilutions
  • Touchscreen interface for ease of operation
  • Easily save and recall measurement data sets
  • ISO 7027 compliant

    • Technical Data

    Parameter Value
    Model Model WM-040-1004 (IR)
    Light Source IR LED (860 nm)
    Regulatory Compliance ISO 7027
    Measuring Principle Nephelometric (Multipath 90° BLAC)
    Measuring Range 0.01 – 4000 NTU (FNU)
    Accuracy ± 1.8 % of reading + straylight
    Stray Light < 0.014 NTU
    Display Units NTU, FNU, Degrees, mg/L Kaolin, mg/L PSL
    Reading Modes Single, Signal Averaging, Fast-Settling
    Calibration Options Full-range calibration from 0 – 4000 NTU
    Detector Silicon Photodiode
    Sample Required 10 mL (0.4 oz)
    Display Full-Colour Touchscreen
    Display Size 55 x 95 mm (W x H)
    Interfaces USB-A USB-C
    Data Logger 250 measurements, all calibrations, verifications and factory-restore actions
    Data Transfer Format .csv
    Power Supply 4 batteries (AA) 3 NiMH-battery pack (AA) Universal (90 – 240 VAC), via external power supply
    Compliance CE CSA FCC A RoHS TÜV UL WEE
    Languages User Interface German, English, French, Spanish, Portuguese, Chinese, Japanese, Dutch, Turkish, Polish
    Languages Quick Start Guide German, English, French, Spanish, Italian, Portuguese, Chinese, Dutch, Turkish, Russian
    Languages Full User Manual German, English, French, Spanish, Italian, Portuguese, Chinese, Dutch, Turkish, Russian
    Dimensions 6.1 x 3.27 x 8.86″
    Weight with Packaging (898 g with four AA alkaline batteries)
    ]]>     https://www.vincalabtech.com/product/turbidimeter-tb-350/feed/ 0     NIRS DS3 Feed Analyser https://www.vincalabtech.com/product/nirs-ds3-feed-analyser/ https://www.vincalabtech.com/product/nirs-ds3-feed-analyser/#respond Wed, 08 Apr 2026 10:30:22 +0000 https://www.vincalabtech.com/?post_type=product&p=3180 Advanced feed analysis for everyone. The innovative NIRS™ DS3 combines unique analytical performance with the latest software and networking services, making reliable test data for decision-making more available than ever. It’s a complete solution that supports all aspects of your analytical operations from calibration development to measurement and data integration.

    ]]>     Technical Specification
    Parameter Value
    Dimensions (w x d x h) 375 x 490 x 300 mm
    Weight 27 kg
    Degree of protection IP 65
    Measurement mode Reflectance or transflectance (for liquids)
    Wavelength range 400 – 2500 nm
    Detector Silicon (400 – 1100 nm), Lead Sulphide, PbS (1100 – 2500 nm)
    Optical bandwidth 8.75 ± 0.1 nm
    Data resolution 0.5 nm
    Number of data points 4200
    Number of subsamples Default: 7 for small cup; 8 for large cup
    Self test 12 minutes (variable)
    Analysis time <1 minute for 32 scans (8 subsamples, 4 scans per subsample)
    Network connections IQX™ Device Management
    Installation requirements
    Voltage supply 100-240 V AC*, frequency 50-60 Hz, Class 1, protective earth
    Ambient temperature 5 – 40°C
    Storage temperature -20 to 70°C
    Ambient humidity < 93% RH
    Mechanical environment Stationary during use
    EMC environment Laboratory use, industry requirements
    *Mains supply voltage fluctuations not exceeding ±10% of the rated voltage.
    ]]>     https://www.vincalabtech.com/product/nirs-ds3-feed-analyser/feed/ 0     Infratech Whole Grain & Flour Analyser https://www.vincalabtech.com/product/infratech-whole-grain-flour-analyser/ https://www.vincalabtech.com/product/infratech-whole-grain-flour-analyser/#respond Wed, 08 Apr 2026 10:30:20 +0000 https://www.vincalabtech.com/?post_type=product&p=3179 Solid, straightforward and reliable, Infratec™ draws on the latest advances in NIR technology, connectivity and usability. It makes the job of quality control easier and less time-consuming as a reliable cornerstone for any grain handling operation.

    ]]>     Technical specification
    Feature Specification
    Dimensions (W x D x H) 410 x 460 x 415 mm
    Weight 28.5 kg (31 kg with test weight module)
    Voltage 220-240V 50-60Hz or 110-120V
    Rated current 1.0A (110-120V) / 0.5A (220-240V)
    Fuse T 5 A (250V)
    Power consumption 85 W (24V)
    Input supply 24V DC from FOSS approved power supply
    Spectrometer Scanning monochromator
    Wavelength range 570 – 1100 nm
    Detector Silicon
    Optimal bandwidth 7 nm
    Number of data points/scan 1061
    Mode Transmittance
    Light source Tungsten halogen lamp
    Interface Ethernet, 3 x USB (full function) including one on the instrument front for easy access
    Display 10 inch capacitive touch screen
    Noise Level < 70 dB(A)
    Degree of protection IP 54
    Sample handling and result presentation
    Analysis time

    Less than 60 seconds for 10 sub-samples including test weight analysis and as little as 40 seconds when dynamic sub-sampling enabled
    Path length

    Variable cell automatically controlled from 6 – 33 mm
    Result report

    Presented on the display as default. Can be sent to PC/LIMS and the printer port
    Outlier function

    Warnings and options for the presentation of the result
    Software

    Menu driven with touch screen interface
    Regression programs

    ANN (Artificial Neural Network); PLS (Partial Least Squares)
    No. of sub-samples

    Between 1 and 30 sub-samples (10 sub-samples standard)
    ]]>     https://www.vincalabtech.com/product/infratech-whole-grain-flour-analyser/feed/ 0     NIRS™ DA1650 Oilseed Crush Analyser https://www.vincalabtech.com/product/nirs-da1650-oilseed-crush-analyser/ https://www.vincalabtech.com/product/nirs-da1650-oilseed-crush-analyser/#respond Wed, 08 Apr 2026 10:29:28 +0000 https://www.vincalabtech.com/?post_type=product&p=3175 Key features of the NIRS™ DA1650 for Oilseed Crush analyser • ISO compliant NIR analysis • Rapid analysis of protein, moisture and oil • Low maintenance • Robust design • Factory standardised • Compatible with other FOSS NIR solutions • Ready to use calibrations for a variety of sample types • Remotely supported through Mosaic network software • Built-in computer with intuitive touchscreen interface]]> Technical Specification
    Feature Specification
    Dimensions (W x D x H) 230 x 530 x 280 mm
    Weight 16 kg
    Degree of protection IP 65 (Dust and water proof)
    Measurement mode Reflectance
    Wavelength range 1100 – 1650 nm
    Detector Diode array
    Analysis time <1 minute*
    *Adjustable
    ]]>     https://www.vincalabtech.com/product/nirs-da1650-oilseed-crush-analyser/feed/ 0